5 Common Fusion Mineral Paint Complaints

Fusion Mineral Paint has received tons of praise over the years. A simple Google search of the product will lead you to dozens of furniture upcycling blogs that applaud the paint for the amazing results that it produces.

However, certainly, not everyone loves the product. There are certainly some common complaints about Fusion Mineral Paint. Not all of these complaints may be valid, however, at the very least you should certainly consider them before purchasing the product.

In this post, you can discover 5 common Fusion Mineral Paint complaints compiled from Amazon reviews, blogs, and forums.

1. The paint chips off easily

In Amazon reviews, one complaint of Fusion Mineral Paint is that the paint chips off easily. One reviewer claimed that after lightly bumping a recently painted piece of furniture against a wall, a bit of the paint chipped off.

To be fair, according to most other reviews, the paint is extremely durable. Additionally, Fusion Mineral Paint (available here on Amazon) claims that the product has an all-in-one top coat. The implication is that a top coat isn’t needed and that the paint is durable enough to weather usual wear and tear.

Nevertheless, even the most durable paints in the world can still chip off and Fusion mineral paint is not an exception. If you want to be extra sure that the paint doesn’t chip easily, apply a top coat or use a sealer spray to protect your newly painted pieces of furniture.

2. The paint is not self-leveling

Fusion Mineral Paint describes its product as self-leveling, meaning that the paint doesn’t leave brush strokes and it creates a completely even finish.

Another complaint of Fusion mineral paint is the paint is NOT self-leveling like the product claims that it is. There have been complaints that you can see very visible brush strokes in the paint after application.

Although these reviews might be truthful, it’s important to note that even the best quality self-leveling paint doesn’t always produce a completely flat and even finish. If your painting technique is poor and if you’re using cheap brushes, chances are that you will still see some brush strokes.

If you are super concerned about brush strokes, consider using a good-quality oval-shaped paintbrush. Oval or round-shaped paint brushes generally don’t leave prominent brush marks. Alternatively, by using a foam roller you can avoid creating brush marks from the get-go. 

3. Prep is needed

Fusion Mineral Paint claims that minimal prep is needed before applying the paint. The company claims that sanding is not needed in some cases. The paint also supposedly has a built-in primer, so presumably priming your furniture isn’t necessary either.

However, disgruntled reviewers of the product say otherwise. Reviewers claim that without prepping the furniture, the paint doesn’t hide imperfections. Others say the paint finish isn’t as durable as it could be without prep.

Ultimately, these consumer complaints are perfectly valid. Although Fusion Mineral Paint claims that prep isn’t needed, proper prep almost always makes a big difference. No matter how well the paint adheres to surfaces, proper prep makes imperfection less visible and enhances your paint’s durability.

Note that the amount of prep your furniture warrants depends on its condition.

For instance, if your furniture is made out of dark wood and has a shiny finish, you should sand off the finish and apply a stain-blocking primer before painting. However, as long as your wood isn’t rich in tannins, you can likely paint without priming.

If your furniture has marks and scratches, fill these imperfections in with wood filler before sanding down your furniture. 

4. The paint is too expensive

Fusion Mineral Paint is certainly more expensive than most paint used for furniture. At 28 dollars for 16.9 ounces of paint, Fusion Mineral Paint is not cheap.

Naturally, a common complaint is that the paint is simply too expensive for what it’s worth. Some reviewers make the argument that the benefits of the product don’t justify the cost and that there are much more affordable paints that look just as good.

Nevertheless, it’s important to take these critiques with a grain of salt. After all, the value of the product is a matter of opinion.

If you want to make a piece of furniture look stunning in your home, it might be worth the extra expense. However, if you are flipping furniture as a business, a more cost-effective paint might make more sense to maximize profits.

5. No return policy

Reviewers of the product who weren’t happy with the result have requested either a refund or demand to return the product. However, Fusion Mineral Paint simply doesn’t do returns or refunds unless the paint was damaged as it was shipped. Most other paint brands have similar policies.

Final words: Is Fusion Mineral Paint right for you?

Although there are various complaints about Fusion Mineral Paint floating around the internet, the reviews of the Fusion Mineral Paint are positive for the most part. The vast majority of users are extremely happy with the product, so it’s important to take bad reviews with a grain of salt.

As alluded to before, the most amazing paint in the world won’t make up for poor execution. If you don’t prep your furniture at all, use cheap paint brushes, and do a sloppy job, the finished product certainly won’t look good even if the paint is of amazing quality. Some bad reviews of the product seem to stem from poor use of the product rather than the product itself. 

Whether you decide to use Fusion Mineral Paint or not, best of luck to you in your furniture painting endeavors!

 

Sources:

https://www.amazon.com/Fusion-Mineral-Paint-Coal-Black/dp/B00O2JNZ3Y/ref=sr_1_2?crid=13DM3S3K5IT9Z&keywords=fusion%2Bmineral%2Bpaint&qid=1672692077&sprefix=fusion%2Bmineral%2Bpaint%2Caps%2C115&sr=8-2&th=1

Comments

  1. I painted a small side table with Fusion Mineral paint in the summer of 2022. I did prep it, and was (reasonably) happy with the result. I am still developing my skills, so the finished product was not flawless. Unfortunately, what I thought was a non-porous flower pot, left a water ring, and so (June 2023) I set about repairing the damaged surface. EASIER SAID THAN DONE! I hoped that an orbital sander would do the trick… Nope. And so I doused it in QCS finish remover, following the instructions to the letter. I had to resort to using the old “wrap the piece in plastic” method, and still the paint stubbornly remains in the grain. I have done some Internet research, but alas, I find mostly sites dedicated to promoting the product rather than providing objective commentary. Take from this what you will. I’m now trying to figure out how to move forward.

Leave a Comment